Jingmen Hongtu Company Solicitation for Bids for Primer Spraying Equipment

Published time:

2023-11-24

I. Introduction to the Bidding Project

(1) Project Name: Primer Spraying Equipment

(2) Bidder: Jingmen Hongtu Special Aircraft Manufacturing Co., Ltd.

(3) Project Location: No. 16, Yingchun Avenue, Duodao District, High-tech Zone, Jingmen City

(4) Bidding Scope and Content: One set of primer spraying equipment, responsible for on-site installation and commissioning of the complete set of equipment, implementing a turnkey project.

(5) Quality and Delivery Time Requirements: The equipment meets national standards and occupational health requirements; delivery within 90 calendar days after contract signing.

II. Registration Requirements:

(1) Bidding units must have independent corporate legal qualifications, and their business scope includes manufacturers or agents of environmental protection and coating equipment design, manufacturing, sales, and installation. If it is an agent, it must have brand authorization qualifications; it has the ability to independently complete this project and has experience in similar projects.

(2) Performance Requirements: Within the past 3 years (November 1, 2020-November 1, 2023), no less than 3 similar achievements have been completed. Similar achievements refer to similar projects with a single contract amount of 2 million yuan or more (performance proof materials are copies of the bidding notice or contract agreement and equipment acceptance report).

(3) Personnel and Equipment Requirements: A personnel list and equipment capabilities must be provided (with the company seal).

(4) Financial Requirements: Good financial condition, and provide financial statements audited by a third-party audit institution in the past two years.

(5) Credit Requirements: Not under the status of property being taken over, frozen, or bankrupt, no administrative penalties less than 500,000 yuan in the national administrative region, no more than 3 enforcement records with a total amount not exceeding 300,000 yuan, except for those that have eliminated the enforcement records before bidding.

(6) This bidding does not accept joint bids.

III. Registration Method and Time:

This bidding project adopts telephone and on-site registration. Bidding units that meet the above registration requirements should submit their basic qualifications to the following email (chenzhengxin@enricgroup.com) or submit them on-site to the Enterprise Management Department of Jingmen Hongtu Special Aircraft Manufacturing Co., Ltd. before 17:00 on November 30, 2023, from 9:00 to 12:00 and 14:00 to 17:00 every day (Beijing time, the same below). After passing the registration, each unit should pay a registration fee (including electronic materials) of 300 yuan to Jingmen Hongtu Special Aircraft Manufacturing Co., Ltd. (remittance or bank transfer, the payment must be marked: registration fee).

IV. Bid Security Deposit

(1) The bid security deposit for this project is RMB 100,000 (in words: One hundred thousand yuan), which should be submitted to the bidder in one lump sum before December 6, 2023.

(2) Bidding units should submit the bid security deposit by bank transfer or remittance, and it should be transferred from the bidding unit's basic account, and participate in the opening ceremony with the receipt issued by the bidder.

(3) The bid security deposit of unsuccessful bidders will be returned without interest within 15 days after the contract is signed; the bid security deposit of the successful bidder will be directly converted into a contract performance bond when the successful bidder signs the contract.

V. How to Obtain Bidding Documents and Drawings:

Bidding units that have passed the initial qualification review should obtain the electronic version of the bidding documents from Han Yu in the procurement department at the latest on December 1, 2023, with the receipt issued by the bidder or payment information after receiving the telephone notification from the bidder.

VI. Q&A Time, Submission Time of Bidding Documents, Opening Time and Location (Specific details are subject to the bidding documents):

(1) Bidding units submit written questions and Q&A: Submit to Han Yu, Procurement Department, Jingmen Hongtu Special Aircraft Manufacturing Co., Ltd., or send an email to hanyu@enricgroup.com before 17:00 on December 4, 2023.

(2) Bidding Deadline: Before 9:00 on December 8, 2023 (specific details are subject to the bidding documents), delivered to the opening ceremony site, late submissions will not be accepted.

(3) Planned Opening Time: 9:00 on December 8, 2023 (specific details are subject to the bidding documents).

VII. Notes: During registration, each bidding unit must not disclose the information of the recommender, and must not use internal or external relationships to affect the fairness and justice of the bidding process, otherwise its bidding qualification will be cancelled.

VIII. Registration Contact Person: Chen Zhengxin Contact Number: 18986977928 chenzhengxin@enricgroup.com

Business Consultation: Han Yu Contact Number: 18872859405 hanyu@enricgroup.com

Technical Consultation: Liu Tong Contact Number: 13774088255 liutonga@enricgroup.com

IX. Account Information of Jingmen Hongtu Special Aircraft Manufacturing Co., Ltd.:

Bank: Construction Bank Jingmen Branch Account: 4200 1668 6080 5901 9424

                                                                                   

Bidding Management Committee Office of Jingmen Hongtu Special Aircraft Manufacturing Co., Ltd.

November 24, 2023

Previous:

Jingmen Hongtu Molecular Pump Vacuum Unit Bidding Announcement

Next:

Tender Notice for Roller Frame of Albania Topsoil Jar Project

Related Announcements

CNC drilling and milling machine bidding announcement

I. Project Overview: (1) Project Name: CNC Drill Milling Machine (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: No. 16, Yingchun Avenue, Duodao High-tech Zone, Jingmen City (4) Scope and Content of Tender: 1 CNC drill milling machine, responsible for on-site installation and commissioning of complete sets of equipment, implementing a turnkey project. (5) Quality and Delivery Requirements: The equipment meets national standards and occupational health requirements; delivery within 30 calendar days after contract signing.

Centralized Gas Supply Renovation Bidding Announcement

Special Equipment Retrofit Bidding Announcement

I. Project Overview: (1) Project Name: Special Equipment Transformation (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: Jingmen High-tech Zone · Duodao District, Yingchun Avenue, No. 16

Tender Notice for Chiller

I. Project Overview: (1) Project Name: Chiller (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: No. 16, Yingchun Avenue, Duodao District, High-tech Zone, Jingmen City (4) Scope and Content of Tender: One set of chillers, responsible for on-site installation and commissioning of complete sets of equipment, implementing a turnkey project. (5) Quality and Delivery Requirements: Equipment meets national standards and occupational health requirements; delivery cycle is subject to the tender documents.

Tender Notice for Roller Frame Renovation

I. Project Overview: (1) Project Name: Roller Frame Modification (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd.

CNC Lathe Bidding Announcement

I. Project Overview: (1) Project Name: CNC Lathe (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: No. 16, Yingchun Avenue, Duodao District, High-tech Zone, Jingmen City