Centralized Gas Supply Renovation Bidding Announcement

Published time:

2025-04-25

I. Project Overview:

(1) Project Name: Centralized Gas Supply System Renovation

(2) Bidder: Jingmen Hongtu Special Aircraft Manufacturing Co., Ltd.

(3) Project Location: No. 16, Yingchun Avenue, Duodao District, High-tech Zone, Jingmen City

(4) Scope and Content of Bidding: Renovation of a centralized gas supply system, including on-site installation and commissioning of complete sets of equipment, a turnkey project.

(5) Quality and Delivery Requirements: Equipment must meet national standards and occupational health requirements; delivery period is subject to the bidding documents.

II. Registration Requirements:

(1) Bidding units must have independent corporate legal qualifications, and manufacturers or agents whose business scope includes the design, manufacturing, installation, and maintenance of industrial measuring instruments. Agents must have brand authorization qualifications; have the ability to independently complete this project, and have experience in similar projects.

(2) Performance Requirements: Within the past 3 years (April 1, 2022-April 1, 2025), at least 3 similar projects have been completed. Similar projects refer to similar projects with a single contract amount of 200,000 yuan or more (performance proof materials are copies of the bidding notice or contract agreement and equipment acceptance report).

(3) Credit Requirements: Not under asset receivership, freezing, or bankruptcy; no administrative penalties of less than 200,000 yuan nationwide, no more than 3 enforcement records with a total amount of no more than 100,000 yuan, except those that have eliminated enforcement records before bidding.

(4) Personnel and Equipment Requirements: A personnel list and equipment capabilities must be provided (with the company seal).

(5) Financial Requirements: Good financial condition, providing audit reports for the past two years.

(6) Joint bids are not accepted for this tender.

III. Registration Method and Time:

This bidding project adopts telephone and on-site registration. Bidding units that meet the above registration requirements should submit their basic qualifications to the email address: chenzhengxin@enricgroup.com (note: contact person, contact number, contact email, registration unit, registration project) before 17:00 on May 1, 2025, from 9:00 to 12:00 and 14:00 to 17:00 every day (Beijing time, the same below), or submit them on-site to the Enterprise Management Department of Jingmen Hongtu Special Aircraft Manufacturing Co., Ltd. After registration is approved, each unit should pay a registration fee (including electronic materials) of 300 yuan (remittance or bank transfer, when paying, please note: bidding project name and registration fee) to Jingmen Hongtu Special Aircraft Manufacturing Co., Ltd.

IV. Bid Security:

(1) The bid security for this project is RMB 10,000 (in capital letters: Ten Thousand Yuan, when paying, please note the bidding project name and bid security). Bidding units should submit it to the bidder in one lump sum before May 12, 2025.

(2) Bidding units should submit the bid security by bank transfer or remittance, and it should be transferred from the basic account of the bidding unit, and participate in the opening ceremony with the receipt issued by the bidder;

(3) The bid security of unsuccessful bidders will be returned without interest within 15 days after the contract is signed; the bid security of the successful bidder will be directly converted into a contract performance bond when the successful bidder signs the contract.

V. Obtaining Bidding Documents and Drawings:

Bidding units that have passed the initial qualification review should obtain the electronic version of the bidding documents from Han Yu in the procurement department by May 7, 2025 at the latest, with the receipt or payment information issued by the bidder after receiving the telephone notification from the bidder.

VI. Q&A Time, Submission of Bidding Documents, Opening Time and Location (Specific details are subject to the bidding documents):

(1) Bidding units submit written questions and Q&A: Submit to Han Yu, Procurement Department, Jingmen Hongtu Special Aircraft Manufacturing Co., Ltd., or send an email to hanyu@enricgroup.com before 17:00 on May 8, 2025.

(2) Bidding Deadline: Before 9:00 on May 14, 2025 (specific details are subject to the bidding documents), delivered to the opening ceremony site, late submissions will not be accepted.

(3) Planned Opening Time: 9:00 on May 14, 2025 (specific details are subject to the bidding documents).

VII. Notes:

Bidding units must not disclose the information of the recommender during registration, and must not use internal or external relationships to influence the fairness and impartiality of the bidding process, otherwise their bidding qualifications will be cancelled.

VIII. Registration Contact Person: Chen Zhengxin Contact Number: 18986977928 chenzhengxin@enricgroup.com

Business Consultation: Han Yu Contact Number: 18872859405 hanyu@enricgroup.com

Technical Consultation: Bian Jiayuan Contact Number: 17363341230 bianjiayuan@cimc.com

IX. Account Information of Jingmen Hongtu Special Aircraft Manufacturing Co., Ltd.:

Bank: Construction Bank Jingmen Branch

Account: 4200 1668 6080 5901 9424

Note: When paying, please note the bidding project name and fee name (registration fee, bid security).

 

Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. Bidding Management Committee Office

April 25, 2025

Previous:

CNC drilling and milling machine bidding announcement

Next:

Special Equipment Retrofit Bidding Announcement

Related Announcements

CNC drilling and milling machine bidding announcement

I. Project Overview: (1) Project Name: CNC Drill Milling Machine (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: No. 16, Yingchun Avenue, Duodao High-tech Zone, Jingmen City (4) Scope and Content of Tender: 1 CNC drill milling machine, responsible for on-site installation and commissioning of complete sets of equipment, implementing a turnkey project. (5) Quality and Delivery Requirements: The equipment meets national standards and occupational health requirements; delivery within 30 calendar days after contract signing.

Centralized Gas Supply Renovation Bidding Announcement

Special Equipment Retrofit Bidding Announcement

I. Project Overview: (1) Project Name: Special Equipment Transformation (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: Jingmen High-tech Zone · Duodao District, Yingchun Avenue, No. 16

Tender Notice for Chiller

I. Project Overview: (1) Project Name: Chiller (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: No. 16, Yingchun Avenue, Duodao District, High-tech Zone, Jingmen City (4) Scope and Content of Tender: One set of chillers, responsible for on-site installation and commissioning of complete sets of equipment, implementing a turnkey project. (5) Quality and Delivery Requirements: Equipment meets national standards and occupational health requirements; delivery cycle is subject to the tender documents.

Tender Notice for Roller Frame Renovation

I. Project Overview: (1) Project Name: Roller Frame Modification (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd.

CNC Lathe Bidding Announcement

I. Project Overview: (1) Project Name: CNC Lathe (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: No. 16, Yingchun Avenue, Duodao District, High-tech Zone, Jingmen City