Jingmen Hongtu Molecular Pump Vacuum Unit Bidding Announcement

Published time:

2023-12-01

I. Project Overview

(1) Project Name: Molecular Pump Vacuum Unit

(2) Bidder: Jingmen Hongtu Special Aircraft Manufacturing Co., Ltd.

(3) Project Location: No. 16, Yingchun Avenue, Duodao District, High-tech Zone, Jingmen City

(4) Bidding Scope and Content: Three sets of molecular pump vacuum units, responsible for on-site installation and commissioning of complete sets of equipment, implementing a turnkey project.

(5) Quality and Delivery Requirements: Equipment meets national standards and occupational health requirements; delivery within 45 calendar days after contract signing.

II. Registration Requirements:

(1) Bidding units must have independent corporate legal qualifications, manufacturers or agents with relevant qualifications in the design, manufacturing, sales, and installation of vacuum equipment in their business scope. If it is an agent, it must have brand authorization qualifications; it has the ability to independently complete this project and has experience in similar projects.

(2) Performance Requirements: Within the past 3 years (November 1, 2020-November 1, 2023), no less than 3 similar achievements have been completed. Similar achievements refer to similar projects with a single contract amount of 100,000 yuan or more (performance proof materials are copies of the bidding notice or contract agreement and equipment acceptance report).

(3) Credit Requirements: Not under the status of property being taken over, frozen, or bankrupt, no administrative penalties less than 500,000 yuan have been handled nationwide, no more than 3 enforcement records with an enforcement amount not exceeding 300,000 yuan, except for those that have eliminated the enforcement record before bidding.

(4) Personnel and Equipment Requirements: A personnel list and equipment capabilities (with company seal) must be provided.

(5) Financial Requirements: Good financial condition, two years of audit reports must be provided.

(6) This tender does not accept joint bids.

III. Registration Method and Time:

This bidding project adopts telephone and on-site registration methods. Bidding units that meet the above registration conditions should submit the bidding unit's basic qualifications to the following email (chenzhengxin@enricgroup.com) or submit them on-site to the Enterprise Management Department of Jingmen Hongtu Special Aircraft Manufacturing Co., Ltd. before 17:00 on December 7, 2023, from 9:00 to 12:00 in the morning (Beijing time, the same below) and from 14:00 to 17:00 in the afternoon. Each unit should pay a registration fee (including electronic materials) of 300 yuan (remittance or bank transfer, the payment must be marked: registration fee) to Jingmen Hongtu Special Aircraft Manufacturing Co., Ltd. after the registration is passed.

IV. Bid Security Deposit

(1) The bid security deposit for this project is RMB 10,000 (in capital letters: Ten Thousand Yuan), which should be submitted to the bidder in one lump sum before December 12, 2023.

(2) The bidding unit should submit the bid security deposit by bank transfer or remittance, and it should be transferred from the basic account of the bidding unit, and participate in the opening ceremony with the receipt issued by the bidder;

(3) The bid security deposit of unsuccessful bidders will be returned without interest within 15 days after the contract is signed; the bid security deposit of the successful bidder will be directly converted into a contract performance security deposit when the successful bidder signs the contract.

V. Obtaining Bidding Documents and Drawings:

Bidding units that have passed the initial qualification review should obtain the electronic version of the bidding documents from Han Yu in the procurement department at the latest on December 8, 2023, with the receipt issued by the bidder or payment information after receiving the telephone notification from the bidder.

VI. Q&A Time, Submission Time of Bidding Documents, Opening Time and Location (Specific to Bidding Documents):

(1) Bidding units submit written questions and answers: Submit to Han Yu, Procurement Department, Jingmen Hongtu Special Aircraft Manufacturing Co., Ltd. or send an email to hanyu@enricgroup.com by 17:00 on December 11, 2023.

(2) Bidding Deadline: Before 9:00 on December 15, 2023 (specific to bidding documents), delivered to the opening ceremony, late submissions will not be accepted.

(3) Planned Opening Time: 9:00 on December 15, 2023 (specific to bidding documents).

VII. Notes:

Bidding units must not disclose the information of the recommender during registration, and must not use internal or external relationships to affect the fairness and justice of the bidding process, otherwise their bidding qualifications will be cancelled.

VIII. Registration Contact Person: Chen Zhengxin Contact Number: 18986977928 chenzhengxin@enricgroup.com

Business Consultation: Han Yu Contact Number: 18872859405 hanyu@enricgroup.com

Technical Consultation: Tong Panlong Contact Number: 15972643766 tongpanlong@enricgroup.com

IX. Account Information of Jingmen Hongtu Special Aircraft Manufacturing Co., Ltd.:

Bank: Construction Bank Jingmen Branch

Account: 4200 1668 6080 5901 9424

 

Jingmen Hongtu Special Aircraft Manufacturing Co., Ltd. Bidding Management Committee Office

December 1, 2023

Previous:

Public Notice for Bidding: Waterproofing Project for the Main Plant Building, Spherical Tank Building, and Ancillary Buildings of Phase I, Zhongji Anruike (Jingmen) Energy Equipment Co., Ltd.

Next:

Jingmen Hongtu Company Solicitation for Bids for Primer Spraying Equipment

Related Announcements

CNC drilling and milling machine bidding announcement

I. Project Overview: (1) Project Name: CNC Drill Milling Machine (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: No. 16, Yingchun Avenue, Duodao High-tech Zone, Jingmen City (4) Scope and Content of Tender: 1 CNC drill milling machine, responsible for on-site installation and commissioning of complete sets of equipment, implementing a turnkey project. (5) Quality and Delivery Requirements: The equipment meets national standards and occupational health requirements; delivery within 30 calendar days after contract signing.

Centralized Gas Supply Renovation Bidding Announcement

Special Equipment Retrofit Bidding Announcement

I. Project Overview: (1) Project Name: Special Equipment Transformation (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: Jingmen High-tech Zone · Duodao District, Yingchun Avenue, No. 16

Tender Notice for Chiller

I. Project Overview: (1) Project Name: Chiller (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: No. 16, Yingchun Avenue, Duodao District, High-tech Zone, Jingmen City (4) Scope and Content of Tender: One set of chillers, responsible for on-site installation and commissioning of complete sets of equipment, implementing a turnkey project. (5) Quality and Delivery Requirements: Equipment meets national standards and occupational health requirements; delivery cycle is subject to the tender documents.

Tender Notice for Roller Frame Renovation

I. Project Overview: (1) Project Name: Roller Frame Modification (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd.

CNC Lathe Bidding Announcement

I. Project Overview: (1) Project Name: CNC Lathe (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: No. 16, Yingchun Avenue, Duodao District, High-tech Zone, Jingmen City