Tender Notice for Cathodic Protection System of Albania Earthenware Tank

Published time:

2024-01-26

I. Project Overview:

(1) Project Name: Cathodic Protection System for Buried Tanks in Albania

(2) Bidder: Jingmen Hongtu Special Aircraft Manufacturing Co., Ltd.

(3) Project Location: No. 16, Yingchun Avenue, Duodao District, High-tech Zone, Jingmen City

(4) Scope and Content of Bidding: One set of cathodic protection system for buried tanks in Albania. Responsible for on-site installation and commissioning of complete sets of equipment, implementing a turnkey project.

(5) Quality and Delivery Requirements: Equipment must meet national standards and occupational health requirements; delivery before March 31, 2024.

II. Bidding Conditions:

(1) Bidding units must have independent corporate legal qualifications, be manufacturers or agents with relevant qualifications in mechanical equipment design, manufacturing, sales, and installation. If an agent, brand authorization qualifications are required; have the ability to independently complete this project, and have experience in similar projects.

(2) Performance Requirements: Within the past 3 years (January 24, 2021 - January 24, 2024), no less than 3 similar projects have been completed. Similar projects refer to similar projects with a single contract amount of 500,000 yuan or more (performance proof materials are copies of the winning notice or contract agreement and equipment acceptance report).

(3) Credit Requirements: Not under property receivership, freezing, or bankruptcy; no administrative penalties less than 500,000 yuan within the national administrative region, no more than 3 enforcement records with a total amount not exceeding 300,000 yuan, except those that have eliminated enforcement records before bidding.

(4) Personnel and Equipment Requirements: Personnel details and equipment capabilities must be provided (with company seal).

(5) Financial Requirements: Good financial condition, providing audit reports for the past two years.

(6) Joint bids are not accepted for this tender.

III. Registration Method and Time:

This bidding project uses telephone and on-site registration. Bidding units meeting the above registration conditions should submit their basic qualifications to the following email (chenzhengxin@enricgroup.com) or submit them on-site to the Enterprise Management Department of Jingmen Hongtu Special Aircraft Manufacturing Co., Ltd. before 17:00 on February 1, 2024. The submission time is from 9:00 to 12:00 am and 14:00 to 17:00 pm (Beijing time) each day. After registration is approved, each unit should pay a registration fee (including electronic materials) of 300 yuan (wire transfer or bank transfer, please note: registration fee) to Jingmen Hongtu Special Aircraft Manufacturing Co., Ltd.

IV. Bid Security:

(1) The bid security for this project is RMB 30,000 (in words: Thirty Thousand Yuan), which should be submitted to the bidder in one lump sum before February 22, 2024.

(2) Bidding units should submit the bid security by bank transfer or wire transfer from the bidding unit's basic account and attend the opening ceremony with the receipt issued by the bidder;

(3) The bid security of unsuccessful bidders will be returned without interest within 15 days after the contract is signed; the bid security of the successful bidder will be directly converted into a contract performance bond when the successful bidder signs the contract.

V. Obtaining Bidding Documents and Drawings:

Bidding units that have passed the initial qualification review should obtain the electronic version of the bidding documents from Hanyu in the procurement department with the receipt issued by the bidder or payment information before February 3, 2024, at the latest, after receiving a phone call from the bidder.

VI. Q&A Time, Submission Time of Bidding Documents, Opening Time and Location (Specific details are subject to the bidding documents):

(1) Bidding units submit written questions and Q&A: Submit to Hanyu in the procurement department of Jingmen Hongtu Special Aircraft Manufacturing Co., Ltd. or send an email to hanyu@enricgroup.com before 17:00 on February 20, 2024.

(2) Bidding Deadline: Before 14:00 on February 26, 2024 (specific details are subject to the bidding documents), delivered to the opening ceremony site. Bidding documents submitted after the deadline will not be accepted.

(3) Planned Opening Time: 14:00 on February 26, 2024 (specific details are subject to the bidding documents).

VII. Notes:

Bidding units must not disclose referrer information during registration and must not use internal or external relationships to influence the fairness and impartiality of the bidding process; otherwise, their bidding qualifications will be cancelled.

VIII. Registration Contact: Chen Zhengxin Contact Number: 18986977928 chenzhengxin@enricgroup.com

Business Consultation: Han Yu Contact Number: 18872859405 hanyu@enricgroup.com

Technical Consultation: Chen Zhiqiang Contact Number: 13581350079 chenzhiqiang313@enricgroup.com

IX. Account Information of Jingmen Hongtu Special Aircraft Manufacturing Co., Ltd.:

Bank: Construction Bank Jingmen Branch

Account: 4200 1668 6080 5901 9424

                                                                                         

Jingmen Hongtu Special Aircraft Manufacturing Co., Ltd. Bidding Management Committee Office

January 26, 2024

Previous:

Tender Notice for the Basic and Supporting Transformation Project of the Primer Line Equipment of Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd.

Next:

Tender Notice for Heat Treatment Transfer Car

Related Announcements

CNC drilling and milling machine bidding announcement

I. Project Overview: (1) Project Name: CNC Drill Milling Machine (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: No. 16, Yingchun Avenue, Duodao High-tech Zone, Jingmen City (4) Scope and Content of Tender: 1 CNC drill milling machine, responsible for on-site installation and commissioning of complete sets of equipment, implementing a turnkey project. (5) Quality and Delivery Requirements: The equipment meets national standards and occupational health requirements; delivery within 30 calendar days after contract signing.

Centralized Gas Supply Renovation Bidding Announcement

Special Equipment Retrofit Bidding Announcement

I. Project Overview: (1) Project Name: Special Equipment Transformation (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: Jingmen High-tech Zone · Duodao District, Yingchun Avenue, No. 16

Tender Notice for Chiller

I. Project Overview: (1) Project Name: Chiller (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: No. 16, Yingchun Avenue, Duodao District, High-tech Zone, Jingmen City (4) Scope and Content of Tender: One set of chillers, responsible for on-site installation and commissioning of complete sets of equipment, implementing a turnkey project. (5) Quality and Delivery Requirements: Equipment meets national standards and occupational health requirements; delivery cycle is subject to the tender documents.

Tender Notice for Roller Frame Renovation

I. Project Overview: (1) Project Name: Roller Frame Modification (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd.

CNC Lathe Bidding Announcement

I. Project Overview: (1) Project Name: CNC Lathe (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: No. 16, Yingchun Avenue, Duodao District, High-tech Zone, Jingmen City