AP Project Control System Tender Announcement

Published time:

2022-04-01

I. Project Overview

(I) Project Name: AP Project Control System

(II) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd.

(III) Project Location: No. 16, Yingchun Avenue, Duodao District, High-tech Zone, Jingmen City

(IV) Scope and Content of Bidding: AP project control system (attached bidding list), responsible for on-site installation and commissioning of the complete set of systems, implementing a turnkey project.

(V) Quality and Delivery Requirements: Equipment meets national standards and occupational health requirements; delivery within 60 calendar days after contract signing.

II. Registration Requirements:

(I) Bidding units must have independent corporate legal qualifications and have the qualifications for the design, manufacturing, sales, installation, and maintenance of control systems. Within the past 3 years (March 30, 2019-March 30, 2022), they have completed no less than 3 similar projects. Similar projects refer to similar projects with a single contract amount of 1.5 million yuan or more (performance proof materials are copies of the bidding notice or contract agreement and equipment acceptance report); and have corresponding capabilities in terms of personnel, equipment, and funds.

(II) Joint bids are not accepted for this tender.

(III) Credit Requirements: Not under the status of property being taken over, frozen, or bankrupt; no administrative penalties less than 200,000 yuan have been handled within the national administrative region; less than three enforcement records within the past 12 months and the amount of enforcement does not exceed 1.5 million yuan, except for those that have eliminated the enforcement records before bidding.

III. Registration Method and Time: This bidding project adopts telephone and on-site registration methods. Bidding units that meet the above registration conditions should submit the bidding unit's basic qualifications to the following email (xiaomengfan@enricgroup.com) or submit them on-site to the Enterprise Management Department of Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. before 17:00 on April 12, 2022. Each unit should pay a material fee of 500 yuan (telegraphic transfer or bank transfer) to Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. after registration is approved. (Beijing time, the same below) 9:00 to 12:00 in the morning and 13:30 to 17:00 in the afternoon.

IV. Bid Security Deposit

1. The bid security deposit for this project is RMB 100,000 (in words: One hundred thousand yuan). Bidding units should submit it to the tenderer at one time before April 25, 2022.

2. Bidding units should submit the bid security deposit by bank transfer or telegraphic transfer, and it should be transferred from the bidding unit's basic account, and participate in the opening ceremony with the receipt issued by the tenderer;

3. The bid security deposit of unsuccessful bidders will be returned without interest within 5 days after the contract is signed; the bid security deposit of the successful bidder will be directly converted into a contract performance bond when the successful bidder signs the contract.

V. Obtaining Bidding Documents and Drawings: Bidding units that have passed the initial qualification review should obtain the electronic version of the bidding documents from Han Yu in the procurement department with the receipt issued by the tenderer or payment information at the latest before April 15, 2022, after receiving the telephone notification from the tenderer.

VI. Q&A Time, Submission Time of Bidding Documents, Opening Time and Location (Specific details are subject to the bidding documents):

(1) Bidding units submit written questions and Q&A: Submit to Han Yu, Procurement Department, Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd., or send an email to hanyu@enricgroup.com before 17:00 on April 20, 2022.

(2) Bidding Deadline: Before 9:00 on April 28, 2022 (Specific details are subject to the bidding documents), delivered to the opening ceremony site. Bidding documents submitted after the deadline will not be accepted.

(3) Planned Opening Time: 9:00 on April 28, 2022 (Specific details are subject to the bidding documents).

VII. Notes: During registration, each bidding unit must not disclose the information of the recommender, and must not use internal or external relationships to affect the fairness and impartiality of the bidding process, otherwise, its bidding qualification will be cancelled.

VIII. Registration Contact Person: Xiao Mengfan Contact Number: 15572621176 xiaomengfan@enricgroup.com

Business Consultation: Han Yu Contact Number: 18872859405 hanyu@enricgroup.com

Technical Consultation: Chen Zhiqiang Contact Number: 13581350079 chenzhiqiang@enricgroup.com

IX. Account Information of Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd.:

Bank: Construction Bank Jingmen Branch

Account: 4200 1668 6080 5901 9424

 

Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. Bidding Management Committee Office

March 30, 2022

 

Kano LPG Bidding List
Serial Number Name Quantity Unit Remarks
1 Control System 1 Set See bidding requirements for details
2 Power Distribution System      
2.1 Switching Cabinet 1 Unit Switching switch, domestic components, total power 160KW
2.2 Distribution Cabinet 1 Unit Schneider, AB equivalent, specific loop power see power distribution single-line diagram
2.3 Soft Starter Cabinet (Compressor) 1 Unit 2 x 18.5KW compressors, Schneider, AB equivalent, schematic diagram see attachment
2.4 Soft Starter Cabinet (Hydrocarbon Pump) 1 Unit 2 x 18.5KW hydrocarbon pumps, Schneider, AB equivalent, schematic diagram see attachment
2.5 Soft Starter Cabinet (Water Injection Pump) 1 Unit 1 x 45KW water injection pump, Schneider, AB equivalent, schematic diagram see attachment
3 Commissioning and Maintenance 1 Item Installation guidance, programming, wiring, debugging, training, and operation and maintenance for instruments, electrical, control, telecommunications, fire protection, loading, weighing, and video surveillance
Lagos LPG Tender List
Serial Number Name Quantity Unit Remarks
1 LPG Control System 1 Set See bidding requirements for details
2 Power Distribution System      
2.1 Switching Cabinet 1 Unit Changeover switch, domestic components, input current 2000A
2.2 Distribution Cabinet 2 Unit Schneider, AB equivalent, specific loop power see power distribution single-line diagram
2.3 Starter cabinet one 1 Unit 2 x 18.5KW compressors (soft start) + 2 x 18.5KW pumps (soft start) + 2 x 5KW lighting circuits Schneider, AB equivalent, see attachment for schematic diagram
2.4 Starter cabinet two 1 Unit 1 x 18.5KW pump (soft start) + 2 x 45KW pumps (variable frequency) + 1 x 18.5KW pump (variable frequency) Schneider, AB equivalent, see attachment for schematic diagram
3 Loading System 6 Set See bidding requirements for details
4 Commissioning and Maintenance 1 Item Installation guidance, programming, wiring, debugging, training, and operation and maintenance for instruments, electrical, control, telecommunications, fire protection, loading, mixing, and weighing
Lagos PMS Tender List
Serial Number Name Quantity Unit Remarks
1 Control System      
1.1 PMS Control System 1 Set See bidding requirements for details
1.2 SIS System 1 Set See bidding requirements for details
2 Power Distribution System      
2.1 Distribution Cabinet 3 Unit Schneider, AB equivalent, specific loop power see power distribution single-line diagram
2.2 Starter cabinet one 1 Unit 4 x 22KW pumps (soft start) + 5KW lighting circuit, Schneider, AB equivalent, see attachment for schematic diagram
2.3 Starter cabinet two 1 Unit 3 x 22KW pumps (soft start) + 1 x 30KW pump (soft start) + 5KW lighting circuit Schneider, AB equivalent, see attachment for schematic diagram
3 Loading System 6 Set See bidding requirements for details
4 Commissioning and Maintenance 1 Item Installation guidance, programming, wiring, debugging, training, and operation and maintenance for instruments, electrical, PLC control, SIS system (station-wide), telecommunications, loading, and weighing
1 Fire Pump Room Distribution Cabinet 1 Unit Schneider, AB equivalent, specific loop power see power distribution single-line diagram
2 Fire Alarm Control Cabinet 1 Set See specifications
3 Module      
3.1 Broadcast Module 2 Only  
3.2 Fire Alarm Module Box 1 Only IP65
3.3 Input/Output Module 8 Only  
3.4 Input Module 3 Only  
3.5 Explosion-proof Fire Alarm Module Box 4 Only ExdIIBT4 Gb Internal Module
4 Field Equipment      
4.1 Waterproof Manual Alarm Button 12 Only IP66
4.2 Explosion-proof Tri-frequency Flame Detector 16 Only ExdIIBT4 Gb
4.3 Explosion-proof Fire Broadcast 2 Only ExdIIBT4 Gb
4.4 Explosion-proof Audible and Visual Alarm 6 Only ExdIIBT4 Gb
4.5 Explosion-proof Manual Alarm Button 12 Only ExdIIBT4 Gb
4.6 Explosion-proof High-power Fire Broadcast 6 Only ExdIIBT4 Gb
5 Fire System Debugging 1 Item Installation guidance, programming, wiring, debugging, training, and operation and maintenance for the fire alarm system
Lagos Station (LPG and PMS) Video Surveillance Tender List
Serial Number Name Quantity Unit Remarks
1 Video Surveillance System 1 Set Includes 32-channel digital hard disk recorder, remote control, synchronous signal generator, remote control, UPS power supply, monitor, etc.
2 Color Integrated Network Camera 5 Unit IP66
3 Pole 5 Root DN50 L=4m
4 Explosion-proof Network Cabinet 4 Individual ExdIIBT4 Gb internal switch, fiber optic receiver, etc.
5 Explosion-proof Integrated Network Camera 17 Unit ExdIIBT4 Gb 2 million PPI
6 Installation and Debugging 1 Item Installation guidance, wiring, debugging, training, and operation and maintenance for the video surveillance system

Previous:

Small can production line supporting facilities

Next:

Tender Notice for the Power System of the Phase II Spherical Tank Plant

Related Announcements

CNC drilling and milling machine bidding announcement

I. Project Overview: (1) Project Name: CNC Drill Milling Machine (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: No. 16, Yingchun Avenue, Duodao High-tech Zone, Jingmen City (4) Scope and Content of Tender: 1 CNC drill milling machine, responsible for on-site installation and commissioning of complete sets of equipment, implementing a turnkey project. (5) Quality and Delivery Requirements: The equipment meets national standards and occupational health requirements; delivery within 30 calendar days after contract signing.

Centralized Gas Supply Renovation Bidding Announcement

Special Equipment Retrofit Bidding Announcement

I. Project Overview: (1) Project Name: Special Equipment Transformation (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: Jingmen High-tech Zone · Duodao District, Yingchun Avenue, No. 16

Tender Notice for Chiller

I. Project Overview: (1) Project Name: Chiller (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: No. 16, Yingchun Avenue, Duodao District, High-tech Zone, Jingmen City (4) Scope and Content of Tender: One set of chillers, responsible for on-site installation and commissioning of complete sets of equipment, implementing a turnkey project. (5) Quality and Delivery Requirements: Equipment meets national standards and occupational health requirements; delivery cycle is subject to the tender documents.

Tender Notice for Roller Frame Renovation

I. Project Overview: (1) Project Name: Roller Frame Modification (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd.

CNC Lathe Bidding Announcement

I. Project Overview: (1) Project Name: CNC Lathe (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: No. 16, Yingchun Avenue, Duodao District, High-tech Zone, Jingmen City