Tender Notice for Hydraulic Three-Roll Plate Bending Machine

Published time:

2024-03-21

I. Project Overview

(1) Project Name: Hydraulic Three-Axis Plate Rolling Machine

(2) Bidder: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd.

(3) Project Location: No. 16, Yingchun Avenue, Duodao District, High-tech Zone, Jingmen City

(4) Bidding Scope and Content: One hydraulic three-axis plate rolling machine, responsible for on-site installation and commissioning of complete sets of equipment, implementing a turnkey project.

(5) Quality and Delivery Requirements: Equipment meets national standards and occupational health requirements; delivery within 60 calendar days after contract signing.

II. Registration Requirements:

(1) Bidding units must have independent corporate legal qualifications, manufacturers or agents with relevant qualifications in the design, manufacturing, installation, and maintenance of plate rolling machines in their business scope. If it is an agent, it must have brand authorization qualifications; it has the ability to independently complete this project and has experience in similar projects.

(2) Performance Requirements: Within the past 3 years (January 1, 2021-January 1, 2024), no less than 3 similar achievements have been completed. Similar achievements refer to similar projects with a single contract amount of 500,000 yuan or more (performance proof materials are copies of the bidding notice or contract agreement and equipment acceptance report).

(3) Credit Requirements: Not under the status of property being taken over, frozen, or bankrupt, no administrative penalties less than 300,000 yuan have been handled within the national administrative region, no more than 3 enforcement records with an enforcement amount not exceeding 200,000 yuan, except for those that have eliminated the enforcement record before bidding.

(4) Personnel and Equipment Requirements: A personnel list and equipment capabilities (with company seal) must be provided.

(5) Financial Requirements: Good financial condition, provide audit reports for the past two years.

(6) This bidding does not accept joint bids.

III. Registration Method and Time:

This bidding project adopts telephone and on-site registration methods. Bidding units that meet the above registration conditions should submit the bidding unit's basic qualifications to the following email (chenzhengxin@enricgroup.com) or submit them on-site to the Enterprise Management Department of Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. before 17:00 on March 28, 2024, from 9:00 to 12:00 am and 14:00 to 17:00 pm every day (Beijing time, the same below). Each unit should pay a registration fee (including electronic materials) of 300 yuan (remittance or bank transfer, the payment must be marked: registration fee) to Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. after the registration is passed.

IV. Bid Security

(1) The bid security for this project is RMB 30,000 (in capital letters: Thirty Thousand Yuan), which should be submitted to the bidder in one lump sum before April 9, 2024.

(2) Bidding units should submit the bid security by bank transfer or remittance, and it should be transferred from the bidding unit's basic account, and participate in the opening ceremony with the receipt issued by the bidder;

(3) The bid security of unsuccessful bidders will be returned without interest within 15 days after the contract is signed; the bid security of the successful bidder will be directly converted into a contract performance security when the successful bidder signs the contract.

V. Obtaining Bidding Documents and Drawings:

Bidding units that have passed the initial qualification review should obtain the electronic version of the bidding documents from Han Yu in the procurement department at the latest by March 30, 2024, with the receipt issued by the bidder or payment information after receiving the telephone notification from the bidder.

VI. Q&A Time, Submission Time of Bidding Documents, Opening Time and Location (Specific to Bidding Documents):

(1) Bidding units submit written questions and answers: Submit to Han Yu, Procurement Department, Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. or send an email to hanyu@enricgroup.com before 17:00 on April 1, 2024.

(2) Bidding Deadline: Before 9:00 on April 11, 2024 (specific to bidding documents), delivered to the opening ceremony, bidding documents submitted after the deadline will not be accepted.

(3) Planned Opening Time: 9:00 on April 11, 2024 (specific to bidding documents).

VII. Notes:

Bidding units must not disclose the information of the recommender during registration, and must not use internal or external relationships to affect the fairness and justice of the bidding process, otherwise their bidding qualifications will be cancelled.

VIII. Registration Contact Person: Chen Zhengxin Contact Number: 18986977928 chenzhengxin@enricgroup.com

Business Consultation: Han Yu Contact Number: 18872859405 hanyu@enricgroup.com

Technical Consultation: Liu Bo Contact Number: 19151121223 liubo@enricgroup.com

IX. Account Information of Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd.:

Bank: Construction Bank Jingmen Branch

Account: 4200 1668 6080 5901 9424

 

Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. Bidding Management Committee Office

March 21, 2024

Previous:

Laser cutting machine bidding announcement

Next:

Tender Notice for the Basic and Supporting Transformation Project of the Primer Line Equipment of Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd.

Related Announcements

CNC drilling and milling machine bidding announcement

I. Project Overview: (1) Project Name: CNC Drill Milling Machine (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: No. 16, Yingchun Avenue, Duodao High-tech Zone, Jingmen City (4) Scope and Content of Tender: 1 CNC drill milling machine, responsible for on-site installation and commissioning of complete sets of equipment, implementing a turnkey project. (5) Quality and Delivery Requirements: The equipment meets national standards and occupational health requirements; delivery within 30 calendar days after contract signing.

Centralized Gas Supply Renovation Bidding Announcement

Special Equipment Retrofit Bidding Announcement

I. Project Overview: (1) Project Name: Special Equipment Transformation (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: Jingmen High-tech Zone · Duodao District, Yingchun Avenue, No. 16

Tender Notice for Chiller

I. Project Overview: (1) Project Name: Chiller (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: No. 16, Yingchun Avenue, Duodao District, High-tech Zone, Jingmen City (4) Scope and Content of Tender: One set of chillers, responsible for on-site installation and commissioning of complete sets of equipment, implementing a turnkey project. (5) Quality and Delivery Requirements: Equipment meets national standards and occupational health requirements; delivery cycle is subject to the tender documents.

Tender Notice for Roller Frame Renovation

I. Project Overview: (1) Project Name: Roller Frame Modification (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd.

CNC Lathe Bidding Announcement

I. Project Overview: (1) Project Name: CNC Lathe (2) Tenderer: Jingmen Hongtu Special Flight Vehicle Manufacturing Co., Ltd. (3) Project Location: No. 16, Yingchun Avenue, Duodao District, High-tech Zone, Jingmen City